Wi-Fi and Bluetooth products
Connected equipment using short-range radios, with operating channels, antenna options and data modes included in planning.
Telecommunications
EMC and RF Testing for Telecommunications Equipment
Telecommunications equipment needs a test plan that considers its radio functions, digital electronics, power supplies, ports and intended markets. Stancer Testing-Lab provides telecom EMC and RF testing support for wireless devices, connected products and communication equipment.
Our ISO/IEC 17025-accredited EMC and RF laboratory helps your engineering team select representative operating modes, antennas, cables and monitoring arrangements. Measurements and reports document the evaluated configuration and agreed requirements.
Coordinate RF and wireless testing with EMC emissions and immunity testing. Applicable standards, editions, frequency bands and accredited methods are confirmed before booking.
Request a quote
Telecom Products and Test Preparation
The finished product matters, even when it uses an approved radio module. We review the intended antennas, enclosure, power arrangements and integration conditions before defining the evaluation.
IoT and wireless gateways
Gateways, sensors and telemetry products, evaluated around their radio interfaces, connected ports and supplied accessories.
Network and communication equipment
Communication electronics and interfaces, with representative traffic, power supplies and cables for emissions and immunity evaluation.
Integrated radio modules
Products incorporating radio modules, with approval conditions and any additional host-product requirements reviewed for the target markets.
Prepare your telecommunications test program
- Define markets and radiosList destinations, technologies, frequency bands, channels and transmitter modes.
- Configure the productProvide antennas, accessories, power supplies, cables and firmware needed for testing.
- Enable test and monitoring modesAgree how transmitters will be controlled and communication performance observed.
- Document and submitReview results and assemble the evidence needed for the applicable authorization route.
Plan Telecom EMC, Radio Testing and Market Requirements
Radio spectrum measurements and EMC evaluation serve different purposes. Your product may require both, together with other assessments determined by its market and configuration.
| Reference | Role in the evaluation |
|---|---|
| ETSI EN 301 489 series | Radio-equipment EMC requirements. Part 1 provides common requirements, used with the relevant technology-specific part and applicable edition. |
| Applicable ETSI radio standards | Technology- and band-specific spectrum requirements. The correct reference depends on the radio and intended European market route. |
| FCC Part 15 | Relevant requirements for applicable unlicensed devices and unintentional radiators. The subpart and sections depend on the device and band. |
| Applicable FCC licensed-service rules | Cellular and other licensed transmitters may fall under different FCC rule parts; Part 15C is not a universal transmitter standard. |
| RSS-Gen and applicable ISED RSS | General requirements used together with the specification relevant to the radio type and frequency band. |
| Applicable digital-equipment EMC standards | CISPR 32/35, ICES-003 or other product-specific references may be relevant to the digital equipment or host product. |
The table guides requirements review and does not imply accredited coverage for every listed technology or method. Confirm the proposed program against our accreditation information. Safety, RF exposure and other obligations are reviewed separately when applicable.
See FCC testing, ISED testing and CE marking support for market planning. Complete the EMC and RF Client Information Sheet with your radio specifications and test-mode instructions.
What is the difference between RF testing and telecom EMC testing?
RF testing evaluates radio characteristics against the applicable spectrum requirements, such as transmitter output and unwanted emissions. EMC evaluation addresses electromagnetic emissions and the equipment’s responses to disturbances. A wireless product may need both types of evaluation, using a documented configuration and operating modes.
Does an approved Wi-Fi or Bluetooth module eliminate host-product testing?
Not necessarily. Review the module approval conditions, antenna choices, enclosure, other transmitters and integration instructions. The host product may still need EMC evaluation, additional radio measurements or other assessments. Share the module approval documents and complete product configuration before planning.
Do cellular transmitters fall under FCC Part 15C?
Not as a general rule. Licensed cellular transmitters are evaluated under the applicable licensed-service rule parts, while certain other functions in the product may have Part 15 requirements. The device’s bands and functions determine the rules and authorization route to review.
Can we coordinate RF testing, EMC testing and certification documentation?
Yes. Stancer can coordinate the agreed EMC and RF measurements and help prepare supporting technical evidence. EMC pre-compliance testing can also investigate design concerns before formal evaluation. Test reports support the authorization process; certification decisions belong to the responsible certification body where required.
Plan your testing
Discuss your testing requirements
Tell us about your product and target markets. Our technical team will help clarify the testing scope and prepare a tailored quotation.